Skip to main content

Posts

Showing posts from April, 2024

PETROLEUM COKE

  Petroleum coke , abbreviated  coke  or  petcoke , is a final carbon-rich solid material that derives from oil refining, and is one type of the group of fuels referred to as cokes. Petcoke is the coke that, in particular, derives from a final crackingprocess—a thermo-based chemical engineering process that splits long chain hydrocarbons of petroleum into shorter chains—that takes place in units termed coker units. (Other types of coke are derived from coal.) Stated succinctly, coke is the "carbonization product of high-boiling hydrocarbon fractions obtained in petroleum processing (heavy residues)." Petcoke is also produced in the production of synthetic crude oil (syncrude) from bitumen extracted from Canada’s oil sands and from Venezuela's Orinoco oil sands. In petroleum coker units, residual oils from other distillation processes used in petroleum refining are treated at a high temperature and pressure leaving the petcoke after driving off gases and volatiles, an...

FUEL OIL

  ALSO KNOWN AS HEAVY OIL, MARINE OIL , AND FURNACE OIL IFO380  &  IFO180  are Max  3.5% Sulfur  Bunkers (RME, RMF, RMG, RMH, RMK) LS380  &  LS180  are Max  1.0% Sulfur  Bunkers ULSFO  is Max  0.10% Sulfur  Fuel Oil for Compliance with 2015 ECA Regulations MGO  is, unless otherwise specified, a Max  1.50% Sulfur  "Clear and Bright" Distillate (DMA, DMZ) LSMGO  is Max  0.10% Sulfur  Distillate (DMA, DMZ) for Compliance with 2015 ECA Regulations MDO  is Max  1.50% Sulfur  Distillate (DMB) Fuel oil  (also known as  heavy oil ,  marine fuel  or  furnace oil ) is a fraction obtained from petroleum distillation, either as a distillate or a residue. In general terms, fuel oil is any liquid fuel that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of appro...